Straight lines, sealed properly
Tile installation
Kanan Painting installs tile for floors, kitchen backsplashes and bathroom walls — with the substrate preparation and waterproofing that decide whether tile lasts decades or fails in a year.
How tile installation works
- Surface check. The substrate is checked for level, stability and moisture. Tile over a moving or damp surface fails — that is fixed or flagged first.
- Waterproofing where it is wet. Shower and bath surrounds get a waterproofing membrane before tile; dry areas get the preparation they actually need, not upsold extras.
- Layout. The pattern is planned before the first tile — centred sightlines, cuts hidden at edges, and grout lines that line up through corners.
- Setting. Tiles are set in the mortar specified for the tile size and location, with spacers and levelling for flat, even faces.
- Grouting and sealing. Joints are grouted evenly and sealed where the product calls for it; movement joints get flexible sealant, not hard grout that cracks.
- Cleanup and inspection. Haze is cleaned, edges are finished, and the work is inspected with you joint by joint.
Tile and setting materials
Ceramic tile. A clay tile with a glazed surface — economical, easy to cut and a sound choice for walls and backsplashes. It is softer than porcelain, so on floors it is used only where its rating suits the traffic.
Porcelain tile. Fired denser and harder, with very low water absorption. It is the default for floors, showers and entrances because it shrugs off water and wear; the trade-off is slower cutting, which the labour price reflects.
Large-format tile. Tiles 24 inches and up give a modern, low-grout look, but they telegraph every bump in the substrate — they need a flatter base and a levelling system, which is why preparation is priced honestly rather than discovered mid-job.
Natural stone. Marble, slate and travertine are set with stone-specific mortar and sealed after grouting, because stone absorbs water and stains in a way glazed tile does not.
What holds it together. Cement backer board or an uncoupling membrane under floors, a waterproofing membrane in wet areas, the mortar class matched to the tile size, and grout chosen for the joint width — sanded for wider joints, unsanded or epoxy where the surface or the water exposure calls for it.
Price
Tile installation starts from $9.99 per sq ft. The written estimate covers preparation, waterproofing where needed, setting materials and grouting — and states whether the tile itself is included or supplied by you.
Before you book
How much does tile installation cost?
Installation starts from $9.99 per sq ft. The written estimate confirms preparation, waterproofing for wet areas, setting materials and whether tile is included or supplied by you.
Do bathroom tiles really need waterproofing behind them?
In showers and bath surrounds, yes — tile and grout are not waterproof by themselves. A membrane behind the tile is what protects the wall structure.
Can you tile over my existing floor?
Sometimes — when the existing surface is sound, flat and properly bonded, and the added height works at doorways. We check and tell you honestly whether removal is the better base.
What warranty applies?
Eligible completed work includes a written 15-year workmanship warranty. Ask for the applicable terms, covered surfaces and exclusions with your estimate.



