Decks, fences, pergolas and railings
Outdoor wood does not fail all at once — staining is how you stop the slide
A deck or fence rarely collapses; it greys, checks, splinters and slowly stops being a place you want to sit. Staining is the maintenance that interrupts that slide: it feeds and seals the wood, restores colour, and buys years of service for a fraction of rebuilding. Kanan Painting stains and paints decks and fences across Ontario and Quebec — pressure-treated lumber, cedar and older painted wood — with projects starting from $650, the sharpest entry price in this market.
The work is seasonal and honest: horizontal deck boards live the hardest life of any surface on your property — standing water, snow load and full sun. We set expectations in writing: which products suit your wood, what the finish will look like, and when it will want a maintenance coat.
What we stain and paint
- Decks — boards, stairs, railings and skirting; solid, semi-solid and semi-transparent stain systems
- Fences — both sides by arrangement with neighbours, gates included; the fastest full-yard transformation there is
- Pergolas, gazebos and privacy screens — detailed brush work on the structures sprayers cannot reach cleanly
- Previously painted wood — assessed honestly: sound paint can be prepped and repainted; failing paint usually wants stripping back before a stain system will hold
How deck and fence staining works
- We inspect the wood: rot at post bases and board ends, raised fasteners, grey weathered fibres and any previous coating are recorded in the written estimate.
- Old failed finish is stripped or sanded where it has let go; sound finish is cleaned and keyed.
- The wood is washed and brightened, then left to dry to the moisture level the product specifies — staining damp wood is the classic failure.
- Popped screws and nails are reset, splintered areas sanded, and landscaping and house walls masked.
- Stain is applied by spray-and-back-brush or full brush work, two coats where the system calls for it, and the yard is walked with you.
What sets the price
Deck and fence projects start from $650. The written price depends on square footage and linear footage, the wood's condition and how much stripping it needs, the product tier you choose (semi-transparent shows grain and weathers faster; solid stain hides more and lasts longer), and detail count — spindles, stairs and lattice are hand work. Your free written estimate prices it exactly, before the season books up.
Winter reservations for spring work are 40% off with code KP40-WINTER27 — reserving in winter locks both the discount and the date. Painting work carries our written 15-year workmanship warranty; for stain systems we set the maintenance horizon honestly in your estimate.
Before you book
Stain or paint for a fence — which lasts longer?
Solid stain is our default for fences: it penetrates and wears by fading rather than peeling, so the next maintenance coat is simple. Paint builds a film that peels on outdoor wood and is far more work to renew.
How often does a deck need re-staining?
Horizontal deck surfaces want a maintenance coat every 2–3 years in our climate; vertical surfaces like fences and railings often go 3–5. We set the horizon in writing rather than promise a decade no deck stain can deliver.
Can you stain a brand-new pressure-treated deck?
Not immediately — new pressure-treated lumber needs to weather and dry first, typically a season, or the stain cannot penetrate and will fail. We check moisture and tell you honestly if your deck should wait.
My deck was painted and it is peeling. What now?
Peeling film finishes have to come off — no coating bonds reliably to a failing one. We strip or sand back to sound wood, then move you to a stain system that will not repeat the problem.
