❄ Winter special — 40% off when you book now for April–October 2027 · Use code KP40-WINTER27 · Claim the offer

Kanan Painting · Ontario & Quebec

Brick Staining

Mineral brick stain that soaks in and never peels — colour changes from $1,899

Kanan Painting project — a brick home after mineral brick staining

Brick staining — before & after

Real Kanan Painting brick transformations. Drag the slider to compare the same home before and after staining — the brick texture stays visible, the colour changes completely.

Brick home after staining by Kanan Painting
The same brick home before staining
BEFOREAFTER

Staining is not painting: a breathable mineral stain soaks into the brick and bonds with it instead of forming a film on top, so it cannot peel and the brick keeps breathing. Projects start from $1,899; the written price depends on the brick area, access and the colour change.

Mineral brick stain — not paint

Brick stain soaks into the brick. Paint sits on it. Only one of them peels.

Brick staining changes the colour of brick with a mineral stain that penetrates the surface and bonds inside the pores of the brick and mortar — it does not form a plastic film. That single fact decides everything that follows: a mineral stain cannot peel, blister or trap moisture, the brick keeps its natural texture and variation, and the wall keeps breathing the way it was built to. Kanan Painting stains brick across Ontario and Quebec, with projects starting from $1,899.

The classic use is the one you have seen driving through older neighbourhoods: tired orange or yellow brick transformed to a modern charcoal, slate, white or warm greige — and still visibly, honestly brick. It is equally at home toning down a too-red new build or unifying brick that was patched with mismatched lots over the years.

Stain vs paint on brick — the honest comparison

  • How it bonds — mineral stain penetrates and becomes part of the brick surface; paint forms a film on top of it.
  • Failure mode — stain has no film, so there is nothing to peel; painted brick peels and blisters as moisture pushes out through the wall.
  • Moisture — stain is vapour-permeable, so the wall dries normally; a paint film can trap moisture and accelerate spalling in freeze-thaw cycles.
  • Texture — stain keeps the brick's natural texture, edges and per-brick variation; paint fills and flattens it.
  • Maintenance — stain weathers like the brick itself; painted brick commits you to repainting cycles and eventual stripping.

There are cases for paint — brick that is already painted, or badly damaged brick being unified — and we will tell you if your wall is one of them. But for sound, unpainted brick, stain is the technically correct answer, and it is the one we recommend.

How brick staining works

  1. We assess the brick: type, condition, mortar state, previous coatings and moisture issues are recorded in the written estimate, and a test area confirms colour uptake — brick drinks stain unevenly by design, and the test shows the honest result before you commit.
  2. The wall is washed and biological growth treated; failing mortar joints are pointed out (and repointed first if they need it — stain does not fix mortar).
  3. Windows, stone, soffits and landscaping are masked in detail.
  4. Mineral stain is applied in controlled coats, worked across brick and mortar for an even, natural read, with colour depth built gradually.
  5. The house is walked with you in daylight, and the colour is confirmed wall by wall.

What sets the price

Brick staining starts from $1,899. The written price depends on the brick area and number of storeys, access and scaffolding, mortar condition, the colour change (light-over-dark transformations take more coats), and whether other surfaces — siding, stucco, frames — are done in the same visit. Your free written estimate prices your exact house before any commitment.

Winter reservations for April–October work are 40% off with code KP40-WINTER27. Our work carries a written 15-year workmanship warranty, and our crews are WSIB covered and insured in Ontario.

Brick staining by city — our Ontario pilot

We are rolling brick staining out city by city with local pages that cover each area's brick stock, neighbourhoods and conditions:

Toronto · Vaughan · Mississauga · Brampton · Oakville · Burlington · Hamilton · Milton · Caledon (Bolton) · Richmond Hill · Markham · Newmarket · Aurora · Bradford · Barrie · Kitchener · Waterloo · Cambridge · Guelph · Oshawa · Whitby · Ajax · Pickering · St. Catharines · Niagara Falls · Ottawa · London · Collingwood · Orillia · East Gwillimbury

In Quebec, brick staining is offered in French — see Teinture de brique, with local pages for Montréal, Laval, Longueuil, Brossard, Gatineau, Québec, Lévis, Terrebonne, Sherbrooke and Trois-Rivières.

Before you book

Can any brick be stained?

Sound, unpainted brick is the ideal candidate. The free assessment includes that test — we would rather show you the real result on a small patch than promise a colour the wall cannot hold.

Can brick stain go lighter — even white?

Yes. Light transformations take more coats and the per-brick variation still shows through gently — which is exactly the natural look most homeowners want, rather than a flat painted wall.

How long does brick stain last?

Mineral stain becomes part of the brick surface and weathers at the brick's own pace — measured in decades, not paint cycles, and there is no film to fail. The test area and written estimate exist so the decision is made with open eyes.

Does staining brick hurt its resale value or damage the wall?

Done with true mineral stain, no — the wall keeps breathing and keeps its texture, which is why staining is the method preservation-minded renovators choose over paint. Painted brick is the risky route: trapped moisture and peeling film are what damage brick and worry buyers.

About Kanan Painting

Kanan Painting has painted homes across Ontario & Quebec since 2017 — 3,200+ projects completed, every one backed by a 15-year workmanship warranty. Our crews are WSIB covered & insured, and homeowners rate us 5.0★ on Google across 64 reviews. We use Sherwin-Williams® and Benjamin Moore® paints.

Tell us about your painting project

Send your municipality, photographs, surfaces to paint and preferred dates. We will review the scope and confirm availability before booking.